Sliding board for thermomix tm5 tm6 tm31 tm21 food processor, monsieur cuisine, gm pots or any kitchen robot + 4 rubber wheels.
Vinyl board (including sides of the board) for ceramic or induction hobs.
The board is sliding, moves from left/right and size 60x30cm
It is valid for all thermomix on the market, monsieur cuisine from lidl or any kitchen robot that fits inside the table space 60x30cm.
Very important before place the order:
This is a product that is manufactured to measure and custom order, so you must be sure that the product dimensions fit your kitchen.
Please check these details.
If you need to cut the board, please contact us and we will cut it for you at any cost.
You must have the following measurements in your kitchen so that it comes without problem:
- from wall to countertop edge: at least60cm
- from wall to edge to plate:2cm
All of our boards have the vinyl sides to match the design of your choice.
.
.
What is the wheeled board for?
The function of a board with wheels is:
- be able to move the robot from side to side on top without having to carry weight.
- being able to put the appliance (thermomix, monsieur cuisine, etc.) under the extractor hood and thus evacuate vapors/smoke more efficiently.
- by putting the machine under the hood instead of under the furniture, you will prevent your furniture from being damaged over time due to steam and heat coming off when cooking, so you will keep your furniture intact.
- gives an extremely beautiful touch to the kitchen, very colorful and cheerful.
-the vinyl board can be cleaned without any problems with a damp cloth, it is resistant to moisture, stains or liquids (not corrosive products).
.
.
Does the vinyl already come on the board?
Yes, our boards are delivered with the vinyl already installed covering the sides of it.
Aesthetically they are beautiful, giving the feeling of being a canvas.
.
.
Does the board have stability when the machine is cooking?
Totally.
The board does not move anything, it is not necessary wheels with brakes, as the wheels we put completely absorb the vibrations created by the robot.
You won't notice that the machine is running.
The wheels are fixed and single direction (left/right).
The board in no way will ""walk"" on the countertop.
.
.
How high is the board compared to the vitro?
The wheels have a height of approximately 2.5cm, there is plenty of space and do not collide the board with a vitro or induction hob.
There must be at least 2 cm between wall and plate so that it rolls smoothly.
.
.
Can the board only be used with the thermomix?
No, the board is a universal accessory for moving any kitchen robot along the countertop.
It is very practical for robots such as: thermomix (any model), gm pots, monsieur cuisine (lidl robot), toasters, etc.
.
.
Is it advisable to have a table?
Totally, a lot.
As you have the board, you can put your robots under the extractor hood, so you will avoid cooking under the furniture and that they are damaged by the output of steam/smoke that the robot generates.
You will also avoid taking weight to move the robot, since since it has wheels, you can move it anywhere effortlessly.
.
.
Specifically, for the thermomix, the weak point of this machine is the scale, therefore changing it from place to hand and loading it from one place to another you risk of unstabilizing the weight and ruining it.
If you move it with a board with wheels instead of loading it, you will prevent you from spoiling the scale (the digital weight) so it is a “safety measurement too.
A repair of thermomixronda scale sensors at €200 which is why we undoubtedly advise the use of a board with wheels.
.
.
Do i really like the board but i don't have thermomix, i have other devices like the lidl monsieur cuisine, will the board serve me?
Of course, the function of the board is to support any appliance and can be moved easily.
It is designed for that, not only for thermomix.
.
.
